|
|
Designing intelligent data distribution networks
Stojaspal, Martin ; Škorpil, Vladislav (referee) ; Mišurec, Jiří (advisor)
Master thesis on topic Design of intelligent data distribution network is focused on the design of KNX bus system. The theoretical part is focused on problematic of KNX technology and on the rules, regulations and forms which must correct project documentation contain. The practical part is focused on creation of complete design of project documentation KNX bus system. In this thesis is basically shown how project documentation should look like.
|
|
|
Modern systems for lighting control
Klein, Tomáš ; Pavelka, Tomáš (referee) ; Bátora, Branislav (advisor)
This Master's thesis deals with intelligent installation systems, focused on lighting systems using the DALI bus system. Theoretical part of this work includes a list of currently available intelligent installation systems and its use in both households and industrial buildings. A summarizing description of KNX and DALI bus systems and their actuators and actuating units are a part of this paper. The practical part proposes two examplary boards designed for laboratories of UEEN VUT in Brno and describes its construction, as well as the programs necessary for its programming, control and monitoring. The outcome of this Master's thesis is a survey of possible remote control of DALI bus system's actuators and mutual compatibility of KNX and DALI bus systems. Furthermore, this paper includes background material for laboratory task, based on data found about remote control and DALI bus system's monitoring.
|
|
|
Design of Loxone system installation control for a house with PV plant
Kořínek, Tomáš ; Vrána, Michal (referee) ; Bátora, Branislav (advisor)
This master's thesis deals with a management proposal of Loxone system installation for a family house with a photovoltaic power plant. The first part of thesis deals with the characteristics of the Loxone system and its individual devices. The second part is already focused on the design of the algorithm and the implementation of the lighting, shading, heating and indoor environment of the building control in the Loxone Config program.
|
|
|
Use of modern inteligent wiring for building lighting
Hlinecký, Tomáš ; Bátora, Branislav (referee) ; Baxant, Petr (advisor)
This diploma thesis concerns with problematic of modern intelligent wiring systems in buildings, meanwhile presents their advantages against old classical wiring systems. Also deals with utilization and properties of modern components for regulation, switching and light controlling. The first part deals with light sources and possible ways how to control the power of individual luminary sources. The second part discuss about utilization of radio-frequency systems in new buildings and also in reconstructions. In the next part is described a possibility of bus system for controlling building illumination scope with focusing to control system Nikobus. The last part is concerned on technical-economical evaluation of intelligent wiring systems by various manufacturers according to specific requirements.
|
|
|
Remote control and visualization of bus-systems KNX and DALI for building management
Holub, Jiří ; Macháček, Jan (referee) ; Bátora, Branislav (advisor)
The thesis is focused on bus systems and their control by GUI. Basic energy management principles and the mostly known bus systems are analysed in the first – theoretical part of the paper. The theoretical part is then focused on software tool ETS 4, which is used for activation of system installation KNX. Software tool SmartServer, which is used for communication between bus system KNX and web interface, is described at the end of the first theoretical part. Two laboratory boards assembled of KNX and DALI parts were constructed in the second – practical part. Three laboratory tasks, which are prepared so they are related to theoretical description in previous part, were submitted in next step. Aim of the first task is to introduce basics of the board and PriOn interface. The second task is focused on DALI components and temperature control with PriOn regulating device. Creating of basic visualization and controlling of the board with SmartServer is described in the last task.
|
|
|
ECU controlled car systems
Kadlec, Martin ; Klapka, Milan (referee) ; Strecker, Zbyněk (advisor)
The aim of bachelor thesis is to give an overview of the state of knowledge in the field of controlled car systems and to estimate development in the future. The first part describes the basic terms in the field of exist problems. In the next part are detailed analysis of systems with their allocation and definition.
|
|
|
Design of system wiring of hostel complex, student dormitory and bar
Sladký, Tomáš ; Mastný, Petr (referee) ; Janík, Daniel (advisor)
This diploma thesis focuses on the designing of the systematic wiring in hostel complex, including student dormitory and bar. The work is divided into two parts. The theoretical part involves an overview of current most used intelligent systems. Furthermore, there is a description of the TECO Foxtrot system, which is used to control the complex. The theoretical part summarizes the basic definitions for creating project documentation. Finally, the chapter closes with an outline of a general artificial and escape route emergency lighting design generated using WILS 7.0 software. In the practical part of the diploma thesis, there is a complete project documentation consisting of all requisites needed in the given level of documentation for the construction of a complex of hostel, dormitory and bar using the TECO Foxtrot system. The project documentation contains floor plans of the whole complex, in which the power and data distribution are drawn. It also contains a diagram of wiring of power and system switchboards, topological diagram of power and system distribution, budget and technical report.
|
|
|
Upgrade of the laboratory task of KNX system installation
Hrubeš, Zbyněk ; Müller, Richard (referee) ; Bátora, Branislav (advisor)
This bachelor´s thesis deals with both the theoretical analysis of the KNX bus system, but it is also practically focused on working with KNX products and their programming. In the introductory theoretical part are described the KNX bus system itself, its characteristic properties, functional principle, topological arrangement, possibilities of using communication media and the advantages that brings, in comparison with classic installations in houses and buildings. The next section deals with the description of ETS software for design, planning, programming, and commissioning of KNX installations. Furthermore, the assessment of the possibilities of visualizations for the control of the KNX system, the use of visualization tools designed for this and their subsequent implementation in the laboratory task are discussed. The practical part of the bachelor's thesis is focused on the design of laboratory tasks and their programming using EST6 software using jigs with KNX devices from the company HDL Automation, which were made during the semester work. The output of the bachelor's thesis will be laboratory instructions for teaching and a understanding of working with the KNX system.
|
|
|
Modern systems for lighting control
Klein, Tomáš ; Pavelka, Tomáš (referee) ; Bátora, Branislav (advisor)
This Master's thesis deals with intelligent installation systems, focused on lighting systems using the DALI bus system. Theoretical part of this work includes a list of currently available intelligent installation systems and its use in both households and industrial buildings. A summarizing description of KNX and DALI bus systems and their actuators and actuating units are a part of this paper. The practical part proposes two examplary boards designed for laboratories of UEEN VUT in Brno and describes its construction, as well as the programs necessary for its programming, control and monitoring. The outcome of this Master's thesis is a survey of possible remote control of DALI bus system's actuators and mutual compatibility of KNX and DALI bus systems. Furthermore, this paper includes background material for laboratory task, based on data found about remote control and DALI bus system's monitoring.
|
|
|
New laboratory tasks of the KNX system
Welter, Martin ; Kunc, Josef (referee) ; Bátora, Branislav (advisor)
The bachelor's thesis deals with the design of laboratory tasks for the control of the KNX system electrical installation using devices from the company Hager and Berker. The first part discusses the characteristics of the KNX system, topological arrangement, ETS software, communication media. Furthermore, the remote control of KNX wiring is briefly discussed with subsequent visualization from various companies. The next part is devoted to getting acquainted with the devices that will be used for laboratory tasks with the subsequent creation of laboratory instructions. All functions have been programmed in ETS5 software. Finally, an overall evaluation is made.
|
guest ::
